Esentialist
Learning to Learn One Mistake at a Time

Sena Headset

A simple guide to remind myself how to work the audio controls of my Sena headset.

Voice Commands

Activate

  • “Hello Sena”
  • Center Button and (-) Button simultaneously

“Music” or “Stereo"

  • “Next
  • “Previous”
  • “Stop”

Radio

“FM radio”

Calls

  • “Speed dial [one, two, three]”
  • “Redial”

Others

  • “Check battery”
  • “What can I say?
  • “Connected devices”
  • “Configuration”

Phone Calls

Basic Commands

  • Tap the center button to answer a call.
  • Answer the incoming call by loudly speaking any word of your choice (VOX Phone must be enable).
  • To end a call, press the Center Button for 2 seconds, or wait for the called person to end the call.
  • To reject a call, press the Center Button for 2 seconds until you hear a voice prompt saying “Call Rejected”.

Making a phone call

  • Press the Center Button for 3 seconds, to activate the voice dialer of your mobile phone. For this, the voice dialing function must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
  • Press the Center Button for 3 seconds, to activate the voice dialer of your mobile phone.

Speed dial

  • To enter into the voice speed dial menu, press the (+) Button for 3 seconds.
  • Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for each menu item.
  • Tap the Center Button to select a voice menu among the followings:
    • (1) Last number redial.
    • (2) Speed dial 1
    • (3) Speed dial 2
    • (4) Speed dial 3
    • (5) Cancel
  • If you want to exit the speed dial immediately, tap the (+) Button or the (-) Button until you hear a voice prompt saying “Cancel”, and tap the Center Button.

Music

Spotify

  • To play or pause music, press and hold the Center Button for 1 second until you hear double beeps.
  • To track forward hold the (+) Button.
  • To track back, hold the (-) Button.

Radio

  • Press and hold the (-) Button for 1 second to turn on and off.
  • Press the Center Button for 1 second to go upward to your next saved preset station.
  • Seek and save:
    • Double tap the (+) Button to search up the radio stations or the (-) Button to search down radio stations
    • To save the current station, press the Center Button for 3 seconds until you hear a voice prompt saying “Preset (#)”.
    • Tap the (+) Button or the (-) Button, in order to select which preset number you want for that specific station. You can save up to 10 preset stations.
    • You may cancel the preset operation by waiting approximately 10 seconds. You will then hear “Save preset cancelled”. You can also tap the (+) Button or the (-) Button until you hear “Cancel”. Press the (+) Button for 1 second to confirm cancellation. You will then hear “Save preset cancelled”.
    • To save the current station, press the (+) Button for 1 second. You will then hear a voice prompt saying “Save preset (#)”.
    • To delete the saved station in the preset number, press the (-) Button for 1 second. You will then hear a voice prompt saying “Delete preset (#)”
  • Scan and save:
    • "Scan" is the function that automatically searches station frequencies, starting from the current frequency and up.
    • Press and hold the (+) Button for 1 second. Then the current station frequency moves upward to find other station frequencies.
    • If the tuner finds a station, it stays at the station frequency for 8 seconds, then searches the next station frequency.
    • Scan function stops when you press and hold the (+) Button for 1 second.
    • To save a station while scanning frequencies, tap the Center Button when at that station. You will hear a voice prompt saying “Save preset (#)”. The station will be saved as the next preset number.