The Husky Sliding Digital T-Bevel can be used in woodworking by carpenters and craftspeople in workshops. With the ability to hold and transfer angles between workpiece, this tool will improve accuracy and save time.
Husky Digital Sliding T-Bevel/Angle Finder
The Sliding Digital T-Bevel gauge takes the guesswork out of angle duplication and eliminates the problems associated with analog readings and manual measurement transfer. It is ideal for measuring, storing and transferring inside and outside angles when building cabinetry, furniture and picture frames, installing tile and more. The large LCD display integrates an 8 in. stainless steel blade with a steel locking knob. Practical function buttons make it ultra-convenient for setting and transferring measurements instantly.
- Model Number : Husky 828H
- Purchased at The Home Depot
Instructions
Turning On/Off
- Press the ON/OFF button to turn the Digital T-Bevel on or off.
- The unit will also shut off automatically after 5 minutes of inactivity.
Setting the Display to Zero
- After turning on, reset the display to 0° by aligning the angled end of the blade with the handle and pressing the ZERO button (Part B).
- While the device is on, pressing this button again will zero the digital display.
General Operation
- Open the blade to the desired angle to be measured.
- Screw down the locking screw to save the angle.
- You can also press the HOLD/FLIP button and this will hold the measurement for transfer.
- Press the HOLD/FLIP button to invert the display.
- Press the REV button to get the reverse/supplementary angle readout.
Installing the Battery
- Slide the battery tray out .
- Insert the battery with the positive side down.
- Slide the battery tray back in
Specifications
- 2 tools in 1 sliding digital T-bevel and angle finder
- Measures, stores and transfers inside/outside angles
- Memory flips, hold and reverses angle functions
- Stainless-steel and plastic construction
- 4 function control buttons
- Full LCD display
- Impact resistant ABS handle
- Voltage: DC 2.5-Volt - 3.2-Volt
- Range: 0° to 360°
